Glucocorticoid Anti Inflammatory Yellow Cream Lanolin For Skin Beauty , CAS 8006-54-0

Lanolin

Basic Information:

CAS: 8006-54-0

Customized: Customized

Suitable for: Elderly, Children, Adult

Purity: >99%

Alias: Lanolin Anhydrous; ; Degras; Degras, Neutral; Lano

CAS: 8006-54-0

Einecs: 232-348-6

Flash Point: 209 C

Appearance: Yellow Cream

Stock: Plenty

Transport Package: 50kg/Drum or as Your Requirement

Origin: Wuhan, China

Powder: No

Certification: ISO 9001, USP

State: Solid

Product Name: Lanolin

Melting Point: 38-40 C

Minimum Order Quantity: 1kg

Application: 1.Ointment Base. Chewing Gum and So on

Specification: ISO9001, Kosher

Nature
Lanolin is attached to the wool of a secreted oil; the main component of sterols; fatty alcohols and triterpenes alcohols and about the same amount of fatty acids generated by the ester; about 95%; also contains free alcohol 4%; And a small amount of free fatty acids and hydrocarbons; White or light yellow to dark brown paste translucent; odorless anhydrous relative density of 0.946; Softening point of 38 ~ 44 ºC; Mainly higher alcohols and esters; industrial lanolin ester content of about 94%; free alcohol 4%; free acid 1%; hydrocarbon 1%; The ester has about 60%; non-hydroxy ester and about 40%; hydroxyl ester;predominantly alpha-hydroxy&rpar.
There are two refined lanolin products, namely anhydrous lanolin and water lanolin, Anhydrous lanolin is light yellow or brown yellow ointment,sticky and creamy, smell weak and specific, Soluble in chloroform or ether, dissolved in hot ethanol, very slightly soluble in ethanol,insoluble in water, but with about 2 times the amount of water and mix well, and has excellent emulsifying properties, Lanolin is not saponified in caustic soda, but in caustic soda in ethanol solution,pressurized, heated, can be saponified, Hygroscopicity strong, Mp36-42 ºC, acid value of not more than 1.5, saponification value of 92-106 ,;measured when the heating reflux time 2h. iodine value of 18-35 ,measured in the dark place time 4h,Water lanolin is blended with lanolin and mixed with distilled water. It is a pale yellow or almost white ointment containing 25% to 35% water. Soluble ether, chloroform. Do not dissolve in water, Lanolin is chemically stable and has good adhesion to metal surfaces.

Effect
Lanolin can make skin smooth and soft. The earliest discovery of its skin effect is because it was found that the Australian sheep’s hands are generally more delicate than ordinary people; after the study found that the role of lanolin. The industry for the preparation of high-level anti-rust oil.low-temperature lubricants,printing inks, fiber oil, leather fatliquor, plastic plasticizers, latex defoamers,Medicine for the preparation of rheumatoid cream, zinc oxide plaster and ointment base material. Cosmetic grade lanolin can be used for cold cream, wrinkle cream,crack cream, shampoo, conditioner,hair cream, lipstick and senior soap.Often used as water-in-oil emulsifier,is an excellent moisturizing substances, Can be due to lack of natural moisture and dry or rough skin softening and recovery, It is through the delay, rather than completely prevent the water through the epidermis to maintain the skin usually water content.

Purpose
Can make the main drug quickly absorbed by the mucous membrane and skin, adhesion, stable nature,and can absorb water, not rancidity. For the excellent ointment base and water-in-oil emulsion emulsifier, the amount of 5%. Due to thick,coated with local discomfort, it should not be used alone as a matrix,often combined with vaseline, and can increase the Vaseline water absorption and penetration,
Mainly used in the manufacture of high-level anti-rust oil machinery industry,pharmaceutical industry manufacturing rheumatoid cream,zinc oxide plaster,synthetic fiber synthetic fiber and synthetic resin, daily chemical industry manufacturing crack cream,cold cream, high soap to protect the skin to prevent cracks With a special effect, can also be extracted for the production of hormones in the pharmaceutical industry.